Transport And Storage - Husqvarna K 3000 Vac Bedienungsanweisung

Wet cutting with diamond blade (K 3000
Wet)
Water cooling, which is used when cutting concrete, cools
the blade and increases its service life while also reducing
the formation of dust. Disadvantages include difficulties at
very low temperatures, the risk of damaging floors and
other structural elements, and the risk of slipping.
When wet cutting, the blade is continuously cooled to
prevent overheating.

Transport and storage

• Do not store or transport the power cutter with the
cutting blade fitted. All blades should be removed from
the cutter after use and stored carefully.
• Store cutting blades in dry, frost free conditions.
Special care should be taken with abrasive blades.
Abrasive blades must be stored on a flat, level surface.
If an abrasive blades is stored in humid conditions,
this can cause imbalance and result in injury.
• Inspect new blades for transport or storage damage.
CUTTING BLADES
–
English 11