Installation - LD Systems LDDAVE10G3 Bedienungsanleitung

INSTALLATION & OPERATING:

INSTALLATION

Please place subwoofers and satellite speaker stands on stable and even ground. Do not place subwoofers and
satellite speakers on mobility carts, chairs, tables or something similar in order to prevent accidents.
We recommend Adam Hall speaker stand SPS56 or speaker pole SPS822 (M20 thread, mounted on subwoofer)
and mounting fork for speaker stands SPS823 for use with the LD DAVE G³ satellites.
The LDDAVE10G³ satellites are equipped with a speaker stand flange of 5° slope for best sound distribution.
The LDDAVE12G³ and LDDAVE15G³ satellites are equipped with the patented SM707 speaker stand flange
with variable slope. For slope angle adjustment lift the satellite speaker slightly and carefully from the latching
mechanism (approximately 1/2 cm), turn into desired angle and lower the cabinet.
OPERATING
In order to prevent unpleasant start-up noise caused by connected devices like mixers etc., the LD DAVE G³
system should be the last to be switched on and the first to be switched off.
Before switching power on, the main level control should be set to minimum.
6
Centre of Rotation
+/- 13,5 °
Turn the cabinet into the
required angle.
Lift cabinet
Attention! Please hold the
cabinet firmly!
Lower the cabinet.