Philips BT5275 Bedienungsanleitung Seite 7

Trimming with comb
The appliance comes with a comb that keeps the trimming head at a
certain distance from your skin. This distance determines the remaining hair
length and can be adjusted by turning the zoom wheel.
1 Slide the comb into the guiding grooves on both sides of the
appliance ('click').
Note: The comb does not fit on the trimming head when the 15mm (0.6in)
side is pointing towards the front of the appliance. If this is the case,
turn the trimming head before you slide the comb onto the trimming head.
2 Turn the zoom wheel to select a length setting.
- The length setting selected is the one right below the indicator on the
front of the appliance.
- You can select a length from 0.4mm to 10mm
(see table in section 'Length settings' below).
3 Press the on/off button to switch on the appliance.
4 To trim your beard, move the comb through the hair slowly.
ENGLISH
7