Maintenance; Specifications - JB Systems m-QUANTUM LASER Bedienungsanleitung

ENGLISH

MAINTENANCE


Make sure the area below the installation place is free from unwanted persons during
servicing.

Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened
and may not be corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally
free from any deformation.
 When an optical lens is visibly damaged due to cracks or deep scratches, it must be
replaced.
 The mains cables must be in impeccable condition and should be replaced immediately
when even a small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation
openings should be cleaned monthly.
 The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
 The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surroundings can cause
greater accumulation of dirt on the unit's optics.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified
personnel!

SPECIFICATIONS

Mains Input:
Total Power consumption:
Sound Control:
Laser Power:
µ-STAR & µ-QUASAR LASER:
µ-QUANTUM LASER:
µ-PHOTON LASER:
Laser radiation class:
Beam diameter @ aperture:
Divergence (each beam)
Divergence (total output)
Working temperature:
Laser Safety Standard:
Size:
Weight:
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website:
JB SYSTEMS
®
DC 12V / 600mA
5,7W
Internal microphone
40mW Green CW laser (λ = 532nm)
100mW Red CW laser (λ = 650nm)
80mW Blue CW laser (λ = 450nm)
100mW Red CW laser (λ = 650nm)
40mW Green CW laser (λ = 532nm)
80mW Blue CW laser (λ = 450nm)
3R
<5mm
<2 mrad
<160°
10°C to 40°C
EN/IEC 60825-1 Ed2, 2007-03
117 x 92 x 46 mm
0.35kg
www.beglec.com
7/36
USER MANUAL
µ-LASER