Overhead Rigging - JB Systems m-QUANTUM LASER Bedienungsanleitung

ENGLISH
8. ON/OFF KEY ACTIVATED SWITCH: used to switch the unit on/off. Use the keys to
make sure only a skilled operator is able to switch the laser on.
9. LASER APERTURE: the laser beam exits the enclosure here; make sure to NEVER
look inside the unit through this opening while the laser effect is switched on!
LASER WARNING LABELS: warn against a potentially dangerous laser when not used
by skilled operators.
 "Laser Radiation. Avoid exposure to beam. Class 3R laser product"
 "Caution – Class 3B laser. Laser Radiation when open. Avoid exposure to beam."

OVERHEAD RIGGING


Important: The installation must be carried out by qualified service personal only.
Improper installation can result in serious injuries and/or damage to property.
Overhead rigging requires extensive experience! Working load limits should be
respected, certified installation materials should be used, the installed device
should be inspected regularly for safety.

Make sure the area below the installation place is free from unwanted persons during
rigging, de-rigging and servicing.

Locate the fixture in a well ventilated spot, far away from any flammable materials and/or
liquids. The fixture must be fixed at least 50cm from surrounding walls.

The device should be installed out of reach of people and outside areas where persons
may walk by or be seated.

Before rigging make sure that the installation area can hold a minimum point load of
10times the device's weight.

Always use a certified safety cable that can hold 12 times the weight of the device when
installing the unit. This secondary safety attachment should be installed in a way that no
part of the installation can drop more than 20cm if the main attachment fails.

The device should be well fixed; a free-swinging mounting is dangerous and may not be
considered!
Don't cover any ventilation openings as this may result in overheating.


The operator has to make sure that the safety-relating and machine-technical
installations are approved by an expert before using them for the first time. The
installations should be inspected every year by a skilled person to be sure that safety is
still optimal.
CAUTION EYE DAMAGE: Always position the laser in a way that
prevents the audience from looking directly into the laser beams. The
installation should assure that the beam will not strike the audience.
JB SYSTEMS
®
5/36
USER MANUAL
µ-LASER