Vacuum cleaning
A
14
Accessories / Operating
WARNING!
Always check the appliance and the power cable
before use. Faulty appliances may cause injury and
should not be used.
1. Insert the required nozzle into the telescopic tube
or handle.
2. Pull out the power supply cable until the required
length is reached. A yellow mark on the cable
shows you that the maximum cable length has
almost been reached. The ma-ximum cable length
is shown by a red mark on the cable. Never pull
the cable out of the appliance beyond the red
mark.
3. Press the pedal button ON-OFF " [A] " to switch
on the va-cuum cleaner.
4. Set the required suction level by using the suction
power regulator „- / +" [C].