Fakir Range Electronic Bedienungsanleitung Seite 44

Fault
Appliance does not work. The attached nozzle
Appliance runs
unusually loud.
20
Troubleshooting
Possible cause
does not fit the flooring.
The "carpet/hard floor"
switch is in the wrong
position for the particular
type of floor.
Sucked-in particles have
become jammed.
Solution
Attach the correct nozz-
le.
Set the "carpet/hard
floor" switch to the cor-
rect position for the type
of floor.
Remove particles. If
necessary, use a long
wooden stick (e.g. a
broomstick).