Operating; Work Brakes; After Vacuuming - Fakir Range Electronic Bedienungsanleitung

Work brakes

E

After vacuuming

Use the park holder [E] of the floor nozzle to hold the
suction ube safely in position when the cleaner is not
being used. To do this, insert the park holder of the
floor nozzle into the nozzle holder on the reverse of
the appliance.
Follow the steps below as soon as you stop vacuum
cleaning. Never leave the appliances unattended.
1. Press the foot button On/Off " [A] " to switch off
the vacuum cleaner.
2. Remove the plug from the mains socket.
3. Press the foot button cable rewind " [B] " to retract
the cable. Gently guide the cable with your hand
until the cable has been completely wound in.
4. Insert the holder of the telescopic tube into the
park rail on the underneath of the appliance. Now
B
you can carry the appliance easily or place it on
the floor.
5. Store the vacuum cleaner in a place that is out of
the reach of children.
Never place the appliance next to heat sources and
avoid direct sunlight, as the heat may damage the
vacuum cleaner.

Operating

WARNING!
ATTENTION!
15