Camera Operation; Power On/Off; Channel Selection; Voice Activated Camera - miniland baby baby monitor 7" Bedienungsanleitung

CAMERA OPERTATION

Power ON/OFF

Use the Power ON/OFF sliding switch at the bottom of Camera to turn ON/OFF the unit.

Channel Selection

There are 4 channels for selection in order to avoid interference from other signal sources.
Select the channel by sliding the channel selection switch at the bottom of the Camera unit.
Voice Activated Camera ( CAMERA / AUTO switch)
To Activate: Switch to AUTO by sliding the CAMERA AUTO switch at the bottom of the
Camera unit.
When the sound level of the unit's surrounding area reaches the preset level, the camera will
transmit the image captured to the Monitor.
When the surrounding sound level is below the preset level, LCD on the Monitor unit will be
automatically switched off if no signal is received from the Camera.
To Deactivate: Switch to CAMERA by sliding the CAMERA AUTO switch at the base of the
camera unit.
The Camera will only transmit CAMERA signal continuously when the CAMERA option is
selected.

Rainbow Night Light

Switch to ON or OFF by sliding the OFF/AUTO/ON switch at the bottom of the camera unit.
The rainbow night light will display different colors continuously at the top area of the
camera unit.
Voice Activated ( AUTO) Night Light:
Switch to AUTO by sliding the OFF/AUTO/ON switch on the left of the base of the camera unit.
When the sound level of the unit's surrounding area reaches the preset level, the night light
will be turned on and display different colors continuously.
When the surrounding sound level is below the preset level, the night light will be turned off.
No colors will be displayed at the night light area.
Automatic Infra-Red Night Vision
The infra-red night vision of the camera is designed to allow the camera pick up pictures
during darkness or periods of very low levels of light. The function will switch on
automatically when the level of light is low.
Only black and white image will be displayed on the monitor and only objects placed within
6ft/2m will be monitored.
MONITOR OPERTATION
Power ON/OFF
Use the ON/OFF switch on the front of the unit to turn on/off the unit.
Channel Selection
Press the Channel Switching Button at the front of the monitor to a channel with optimized
clear image and sound. Channels are displayed as CH x on the top right hand corner of LCD.
13