Description Of The Parts; Before Use - miniland baby micro warmy Bedienungsanleitung

4. PRODUCT CHARACTERISTICS

4.1. DESCRIPTION OF THE PARTS

1. Lid with safety seals
2. Basket for accessories
3. Bottle tray
4. Base
5. Clips
5. USAGE INSTRUCTIONS

5.1. BEFORE USE

Wash all components with soap and rinse before use.
Make sure you pour 80 ml of water into the base
5.2. LOADING THE BOTTLES ONTO THE TRAY
1. Place the bottles face downwards on the tray in the spaces
marked .
2. Place the teats and accessories on the tray in the spaces marked
or in the basket for accessories.
3. Insert the accessories' basket in the holes marked
space is needed.
4. Put the lid on the base and close it with the safety seals.
5.3. OPERATION
1. Check that you have put 80 ml of water into the base.
If less water is added than that required, this may damage the product and the microwave. If more water
is added than that required, this means that the bottles and accessories will not be sterilised properly.
2. Put the lid on and close the safety seals.
3. Select the sterilisation time in accordance with the timing table which provides the different times in
line with the power selected on the microwave.
Do not exceed the times indicated in the table.
IMPORTANT: Always wait for at least 2 minutes before taking the steriliser out of the microwave. The
sterilisation cycle will have finished and it must be left to cool down.
6. Once the unit is cold, take off the lid, opening the safety seals.
7. When the unit is open, let the steam out.
8. Wash your hands before touching the sterilised accessories. Be careful! The parts may be very hot.
9. The clips can be used to remove the little accessories without touching them.
10. The elements will be kept sterilised for up to 6 hours provided that the lid is not removed.
6. MAINTENANCE
6.1. APPLIANCE CLEANING AND CARE
· After each cycle, remove the remaining water from the base and rinse to prevent the accumulation of
lime.
· Wash the base and the lid with soap and water and rinse in water.
· Put away when it is totally dry.
7. TECHNICAL SPECIFICATIONS
Maximum water capacity
Bottle capacity
Measurements
Height
Width
Depth
if more
80 ml
5
18
28
26
en
1
5
2
3
4