Installer Manual - Nibe EME 20 Benutzer- Und Installateurhandbuch

Installer manual

INSTALLATION
GENERAL
EME 20 is used to enable communication and control
between the inverter for solar cells and heat pump/in-
door module/control module.
Caution
The heat pump's/indoor module's/control
module's software should be the latest avail-
able version. If not, download the latest recom-
mended software version for your product to
a USB memory device from
and install.
Compatible products
This accessory is suitable for following products:
• F1145 • F370
• F1245 • F470
• F1155 • F730
• F1255 • F750
• F1345 without 2.0
• F1345 with 2.0
• F1355
Contents
2 x Mounting screws
Component positions
Electrical components
X1 Terminal block, power supply
AA23 Communication board
AA23-S2 DIP switch
EME 20 | GB
nibeuplink.com
• VVM 225 • SMO 20
• VVM 310 • SMO 40
• VVM 320
• VVM 325
• VVM 500
X1
AA23
AA23-S2
13