Termozeta La Continua TZ2 STIRONOSTOP Gebrauchsanweisung Seite 20

ŸŸŸ
ENGLISH
TWICE for MINIMUM steam
3 times to DISABLE steam and
change to dry ironing mode
FOR DRY IRONING
• Place the appliance on a firm flat surface.
• Rest the iron on the boiler base (2).
• Turn the iron knob (14) to select the proper temperature (SEE
PARAGRAPH "CHOICE OF THE IRON TEMPERATURE") (figure 1).
• Completely unwind the power cord (7) and plug into the outlet.
• Press the push button (4) to switch on the appliance.
• Press 3 times the steam control push button (6) to enable the dry
ironing mode.
• When the pilot light (11) goes out, the iron
is ready for use.
• The pilot light (11) on the iron will light up
and go out automatically while you are
ironing to show that the soleplate is being
kept at a constant temperature.
• To switch off the appliance, press the push button (4) until the
display goes out.
• Rest the iron on base (2) and wait for the appliance to completely
cool down before storing it.
WHEN YOU HAVE FINISHED IRONING
• To switch off the appliance, press the push button (4) until the
display goes out.
• Unplug the appliance from the outlet.
• Rest the iron on base (2) and wait for the appliance to completely
cool down before storing it.
• Empty the water tank (17) and store the appliance in a safe place,
out of reach of children.