LauraStar COMPACT Gebrauchsanweisung Seite 31

MDE Compact 27.8.2001
Preparing to use your appliance
Ensure the appliance is
unplugged
Always pull the mains plug from the
socket before filling the steam generator.
Filling the iron before using for the first time
Ensure the iron is unplugged from the mains supply. 1. Unscrew the filling cap. 2. Fill the steam generator by pressing
on the bottle. 3. Carefully retighten the filling cap. Caution: avoid overfilling the steam generator; refill carefully.
Caution
!
16:08 Page 31
Choice of water
Use hot or cold tap water.You can use de-mineralised or filtered water if the tape water
is very hard (high calcium content).
De-mineralised
or filtered
Ensure that there is always water in the steam generator. If the steam generator is
switched on without water this might invalidate the warranty for your system.
If the steam generator is over-filled it might spit when starting to iron.
In no circumstances must the cap of the water tank be unscrewed when the appliance is
being used. To fill the appliance during ironing, follow the instructions on page 6.
3
CAUTION: Do not use water with added
chemicals, water softened with salt, de-
ionised water, or softened sea water
because they do not give good quality
steam and could damage the appliance.