Disposal And Recycling; Operation; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL GC-GR 57 Originalbetriebsanleitung

5. Assembly
Fig. 3-10
You will need 8 mm. 13 mm and 14 mm open-
ended wrenches and a size 2 Philips screwdriver
for the assembly work.
Follow Figures 3 – 10 for the assembly.
Once assembled, fi ll the roller with water, sand or
concrete.

6. Operation

Pull the roller over the ground you wish to roll in
even strips. Adjust the dirt wiper (2) so that as
little soil as possible remains on the roller. Only
roll dry ground.
7. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
7.1 Cleaning
We recommend that you clean the device
immediately each time you have fi nished using it.
7.2 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_GC-GR_57_SPK9.indb 10 Anl_GC-GR_57_SPK9.indb 10
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 10 -
11.05.2017 08:20:20 11.05.2017 08:20:20