Energy Consumption - Beko CSA31022 Gebrauchsanweisung

GB

Energy Consumption

Maximum frozen food storage volume is
achieved without using the drawers provided
in the freezer compartment. Energy
consumption of your appliance is declared
while the freezer compartment is fully loaded
without using the drawers.
Practical advice concerning the reduction
of the electricity consumption
1. Make sure that the appliance is located in
well-ventilated areas, far from any source of
heat (cooker, radiator etc.). At the same time,
the location of the appliance must be done in
such a way that it prevents it to be under the
direct incidence of the sunbeams.
2. Make sure that the food purchased in
refrigerated/frozen condition is placed into the
appliance as soon as possible, especially
during summertime. It is recommended to use
thermal insulated bags to transport the food
home.
3. We recommend the thawing of the packets
taken out from the freezer compartment be
done in the refrigerator compartment. For this
purpose, the packet which is going to be
thawed will be placed in a vessel so that the
water resulting from the thawing does not leak
in the refrigerator compartment. We
recommend you to start the thawing at least
24 hours before the use of the frozen food.
4. We recommend reducing the number of
door openings to the minimum.
5. Do not keep the door of the appliance
open more than necessary and make sure
that after each opening the door is well
closed.
Information concerning the noise
and the vibrations which might
appear during the operation of the
appliance
1. The operation noise can increase during
the operation.
- In order to keep the temperatures at the
adjusted temperatures, the compressor of
the appliance starts periodically. The noise
produced by the compressor becomes
stronger when it starts and a click can be
heard when it stops.
- The performance and operation features of
the appliance can change according to the
modifications of the temperature of the
ambient environment. They must be
considered as normal.
2. Noises like liquids flowing or as being
sprayed
- These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.
- The level of noise and vibrations can be
caused by the type and the aspect of the
floor on which the appliance is placed. Make
sure that the floor does not have significant
level distortions or if it can yield to the weight
of the appliance (it is flexible).
- Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed
from the appliance
- The bottles and the vessels placed in the
refrigerator touching each other. In such
cases move the bottles and the vessels so
that there is a small distance between them.
7
Instruction for use