Beyerdynamic UNITE TP Schnellstartanleitung Seite 21

Unite TP – Bodypack Transmitter
The status indicator
information:
Indicator light
Off
Green
Flashing yellow
Yellow
Flashing green/yellow
Flashes red 5 times
Flashing red rapidly
In order to perform a simple pairing, proceed as described in
the following:
1. Set the desired group ID on the transmitter you want to use
for pairing. See chapter 4.2 for reference.
2. Insert only one transmitter into the charging slot of the
charger. If multiple transmitters are inserted into the
charging slots of the charger, the pairing will not start and
the status indicator
(see table). Alternatively, you can connect the transmitter
to the USB port on the charger via a USB cable.
on the charger shows the following
Operating status
Device is switched off
• Device is ready to use
• No pairing information saved
Pairing information is being
copied to the charger or receiver
Pairing information has been
stored in the charger
Device is being localised
• No transmitter
• Too many transmitters
• Operating error
• Charging error
on the charger will display an error
21