Denver Instrument Pinnacle Series Betriebsanleitung Seite 8

Connecting the Balance to AC Power
After conditioning the balance (see above), simply plug the AC adapter into
the rear of the balance and connect the adapter to an appropriate power outlet;
the balance switches on automatically. To avoid extended warm-up periods,
leave the balance plugged in and switched on at all times.
USB port
Back panel
Leveling the Balance Using the Level Indicator
Level the balance any time it is installed in a new location. Make sure all four
feet touch the work surface.
Adjust the leveling feet until the air bubble is centered in the level indicator.
The number of leveling feet depends on the balance model:
Analytical models: 2 front feet
Precision models with round pan: 2 front feet
Precision models with square pan: 4 feet, one in each corner
8
RS-232 Ethernet
port connection
Power Opening
for antitheft
locking
device