Sundirect PE-Plus Installations- Und Bedienungsanleitung Seite 8

5.4 Mounting installation for PE-Plus series
Note: The kit supplied in the package is designed for mounting on a solid wall. If mounted onto
other types of walls, you will need appropriate fixings (not supplied). Please make sure the wall is
safe to mount. We highly recommend having the panel installed by a qualified electrician or
installer authorized by Sundirect.
If you wish to mount the above panels on the ceiling, please contact your Sundirect dealer to
purchase the right ceiling bracket. For PE380-Plus, you need the bracket BC005, and for the other
models, you will need BC004. You will find the mounting instruction in the package of BC004/
BC005 separately.
1
Wall Installation Template
3
5
2
WALL
4
WALL
6
WALL
WALL
WALL
WALL
8
Step 1. Use the supplied
template to mark the
position of the holes on the
wall.
Step 2. Drill holes using a
8mm drill.
Step 3. Insert the dowels
into the holes.
Step 4. Screw in the
supplied screws to the wall.
Step 5. Mount the panel on
the screws.
Step 6. Move the panel to
the right or left side until it's
secured.