Notice To Purchaser; General Introduction - Sundirect PE-Plus Installations- Und Bedienungsanleitung

1. Notice to Purchaser

Thanks for purchasing this Sundirect infrared heater. We hope you enjoy this innovative technology
and that this product will bring a pleasant atmosphere to your home.
Please read these instructions carefully and keep safe for future use. Failure to comply with these
instructions will void your warranty. Do not disassemble or tamper with the product at any time!
Please pay special attention to the safety instructions and use the heater according to these
instructions. Sundirect Technology Ltd. shall not be liable for any damage or loss occurred resulting
from failure to follow these instructions.

2. General Introduction

Sundirect Infrared heaters heat objects instead of the air, making this heater much more efficient
than traditional convection heaters.
The Sundirect Plus series represents a new generation of infrared panel heaters, equipped with a
built-in thermostat receiver inside of the junction box (Article Number: Receiver01) on the backside
of the panel. It needs to be used in conjunction with the Sundirect control system - Smart 1.0 or
Smart 1.0Pro (NOT included in the box) - in order to meet the Ecodesign legislation of the EU/EC
Directive 2009/125/EC.
Our remote control Smart 1.0 has the following features:
* 7days program, 4 time zones each day
* Adaptive start
While remote control Smart 1.0Pro is an upgraded version of Smart 1.0 and has the following
features:
* 7days program, 4 time zones each day
* Open window technology
* Adaptive start
* Remote controllable by Mobile APP.
You may find detailed specifications and instructions in the manual of Smart 1.0/1.0Pro separate
from this manual.
This product complies with the LVD guideline 2014/35/EU and the EMC guideline 2014/30/EU and
meets the following standards:
EN60335-1:2012+A11:2014
EN60335-2-30:2009+A11:2012
EN62233:2008
Rohs 2011/65/EU
RED2014/53/EU
3