D - Configuration; Configuring The Camera And Adding It To The App - avidsen 123982 Sicherheitsanweisungen

D - CONFIGURATION

1 - CONFIGURING THE CAMERA AND
ADDING IT TO THE APP
Note: the screenshots displayed have been taken
from the Android version of the Protect-Home app.
The iPhone version works in exactly the same way.
Download the Protect-Home app
Appstore or Google Play, then launch the app.
Accept the authorisation requests sent by the app
if necessary (access to the camera for scanning the
QRCode, etc.).
Next, click on the icon
camera on your smartphone and invites you to scan
the QRCode shown on the camera:
10
EN
MOTORISED 720P INDOOR WIFI IP CAMERA
on the
, the app opens the
At this point, the camera must be powered on and
started up. It plays a standby tune when it is ready.
Click on "Ready music played" to continue.
The app then asks you how you wish to configure
the camera:
AP connection: via WiFi connection.
Audio configuration: the data will be transmitted by
the smartphone loudspeaker.
Select one of the methods to continue (they are
equivalent):