Dry Ironing; Filling In The Water Tank - Grundig SI 4550 Bedienungsanleitung

OPERATION ______________________________
Preparation
1 R emove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2
C lean the outer parts of the appliance as
described in the section "Cleaning and care".
3 P lace the appliance on an even, stable, dry
and non-slip surface.
Notes
During the first use, a light odour may arise
7
from the iron. This ceases after a couple of
uses.
The "CLICK" sound you hear during ironing,
7
is because of the anti-drip feature of your
appliance. This is a normal sound.
In order to generate steam, the soleplate
7
of your iron has to rise to a certain level of
temperature. By means of the "anti-drip"
feature of your iron, water dripping from the
soleplate of the iron shall be prevented until
E
the soleplate attains the temperature required.
Your product is intended for use with tap
7
water. If your tap water is excessively limy,
we recommend to use a mixture of tap water
with purified water. Prior to ironing for the first
time fill twice and vaporize. Meanwhile, use
the steam burst frequently. In this way, both
J
the steam performance will improve and also
the dust particles which might have penetrated
through the steam channels will be cleaned up.
If water runs out during ironing, you can top
7
up water without waiting the appliance to cool
down. But do not forget to unplug it before
topping up.
When spray does not squirt water, in order
7
to eliminate any possible blocking, close the
spray hole with your finger and press on the
spray button several times.
20 ENGLISH
Caution
When your iron is filled with excessive water,
7
it may overflow. To avoid this, when you hold
your iron horizontally, make sure that the level
of water in the appliance does not exceed the
MAX. line.
Dry ironing
1
S et the steam setting knob
position.
Caution
Always read the care label on your garment
7
before setting the temperature.
2 S et the required ironing temperature. Do not
press the steam burst button during dry ironing.
3 A fter ironing let the appliance cool down in a
E
location that is safely out of reach of children.
Filling in the water tank
1 A lways unplug the appliance. Set the steam
setting knob to "
2 O pen sealing cap of filling inlet
Use cups for filling the water tank. Do not fill the
water tank further than up to the MAX marking.
3
C lose the water refill lid
Note
Even when ironing garments without steam;
7
water should be available in the appliance in
order to use the water spray
Do not fill the water tank with perfume, vinegar,
7
laundry starch, lime removers or other products
or chemicals which shall facilitate the ironing
process.
If your tap water is excessively limy, we
7
recommend to use a mixture of tap water with
purified water.
to the "
H
" position.
on the iron.
G
.
G
.
F
"