Vertical Steam; Spraying Water; Automatic Shutdown (Auto-Off); Dry Ironing - Grundig SI 4850 Bedienungsanleitung

OPERATION ______________________
▪
At the start of ironing, the first few
presses may not produce shock
steam. To produce shock steam,
temperature knob should be at
" " or higher position.
▪
In order to use the shock steam fea­
ture the thermostat indicator light
D
should be turned off.

Vertical steam

Warning
▪
Hold the appliance 15­30 cm
away from the garment and cur­
tains.
▪
During the ironing if the thermostat
indicator light
proceeding with the shock steam
process wait for the light to turn off.
▪
Never direct this steam to people
or pets.

Spraying water

Note
▪
You can easily remove creases
using the water spraying feature.

Dry ironing

In order to make dry ironing, set the
steam setting button
sition.
D turns on, before
I
to the OFF po­
Note
▪
Having water in the appliance
would be advantageous; you may
use the water spraying button
when necessary.
Anti-dripping system
This iron is equipped with drip stop
function: the iron automatically stops
steaming when the temperature is too
low to prevent water from dripping out
of the soleplate.
With the anti­dripping system, you can
perfectly iron even the most delicate
fabrics.
Automatic Shutdown
(Auto-Off)
Notes
▪
In case of automatic turn off the
auto­off light
▪
If the appliance is moved in hori­
zontal position it will be turned on.
▪
It may take 60 seconds for the sole­
F
plate to reach the previously set
temperature.
D
flashes.
ENGLISH 35
J