Atag WDD9074MM Anleitung Seite 98

INSTALLATION
EN 20
• Insert the hood canopy from below into the support worktop, drilled
as described above.
• With the aid of a support, lift the hood canopy until the front comes
out of the Worktop.
• Insert the Brackets 7.2, as indicated in the figure, into the slots
provided and fix them with the screws 12a provided.
• Centre the hood canopy with respect to the cooking hob slot.
• Remove the supports. Using the 2 screws 12c provided, fix the
hood canopy to the worktop.