General - Atag WDD9074MM Anleitung

INSTALLATION

General

This appliance should be connected to the mains power by a registered
installer, who knows and applies the correct safety specifications.
The appliance meets European requirements.
Important information:
• If the appliance is connected to an existing ducting outlet, no other
appliances should be connected to that outlet (such as a heater or
a boiler).
• Follow the applicable local regulations regarding the ventilation of
gas appliances.
• The cooker hood will work better with a short outlet pipe and as few
bends as possible.
• Prior to drilling check that there are no pipes or cables present.
• The cooker hood connection pipe is 120 mm or 150 mm in diameter.
Preferably also use this diameter for the outlet pipe.
EN 13