Inserting The Hood Canopy Into The Support Surface From Below - Atag WDD9074MM Anleitung

INSTALLATION

Inserting the hood canopy into the support surface from below

EN 18
• Insert the hood canopy into the cooker top, drilled as described
above.
• Centre the hood canopy with respect to the cooking hob slot.
• Fix the hood canopy with the 2 screws 12c provided.
Warning: If the cooker top is made from a material that does not allow
the screws 12c to be inserted, use anamount of silicone to glue the
brackets 7.2 to the top and allow it to dry completely before proceeding
with the installation.
• The hood is built ready for front installation of the motor unit.