Bosch BLR 10 Bedienungsanleitung Seite 18

The "AUTO OFF" Button for
Switching off the Automatic
Levelling
With the aid of the remote control, the au-
tomatic levelling of the construction laser
can be switched off for the X and Y axes.
Depending on the construction laser type,
the levelling can be switched off separately
for the Y axis when the unit is in the horizon-
tal position (single axis inclined operation).
The X axis continues to be automatically
levelled. Please refer to the operating in-
structions of your construction laser to de-
termine whether your unit is suitable for sin-
gle axis inclined operation.
Construction Laser with Single Axis
Inclined Operation in the Horizontal
Position
With a single pressing of the "AUTO OFF"
button 6, the automatic levelling is switched
off for both the X and Y axes. With an ad-
ditional pressing of the "AUTO OFF" but-
ton 6, the single axis inclined operation is
switched on. If the "AUTO OFF" button 6
is pressed a third time, the automatic level-
ling for both axes is switched on again.
Construction Laser Without Single Axis
Inclined Operation in the Horizontal
Position and the Construction Laser
in the Vertical Position
With a single pressing of the "AUTO OFF"
button 6, the automatic levelling is switched
off for both the X and Y axes. With an ad-
1 609 929 F28
English–5
(03.08) T