Specifications - Makita BHP440 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
1-3. Red part
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever
5-1. Speed change lever
6-1. Adjusting ring
6-2. Action mode changing ring
6-3. Arrow

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
For Model BHP440
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
6-4. Graduations
7-1. Adjusting ring
7-2. Action mode changing ring
7-3. Arrow
7-4. Graduations
8-1. Sleeve
9-1. Screw
9-2. Hook
9-3. Groove
10-1. Blow-out bulb
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
) : 81 dB(A)
pA
) : 92 dB(A)
WA
2
) : 8.0 m/s
h,ID
2
BHP440
1.7 kg
D.C. 14.4 V
ENE039-1
Work mode : drilling into metal
Vibration emission (ah,D) : 2.5 m/s
Uncertainty (K) : 1.5 m/s
For Model BHP450
Noise
ENG102-3
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
ENG203-2
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
12-1. Limit mark
13-1. Rear cover
13-2. Screws
14-1. Spring
14-2. Arm
14-3. Recesed part
15-1. Carbon brush cap
16-1. Hole
16-2. Carbon brush cap
BHP450
13 mm
13 mm
27 mm
ø 6.8 mm x 50 mm
M6
0 - 1,400
0 - 400
0 - 21,000
0 - 6,000
204 mm
1.8 kg
D.C. 18 V
2
) : 82 dB(A)
pA
) : 93 dB(A)
WA
Wear ear protection
2
) : 8.5 m/s
h,ID
2
ENG302-2
2
or less
ENG102-3
ENG203-2