auna 10027096 Anschluss- Und Anwendungshinweise Seite 8

• Use of recommended accessories only.
• Do not repair the device by yourself. Turn to qualified service personnel.
• Do not place heavy objects in this device.
• Clean the device only with a dry cloth.
• Do not block the ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Power cord/power adaptor
In order to reduce the risk of fire, electrical shock or damage:
• This product should be operated from the type of power source indicated on the rating plate.
• Plug the power adaptor firmly into the wall outlet.
• Do not pull on the power cord, do not bend it and do not place heavy objects on the power cord.
• Do not touch the plug with wet hands.
• When unplugging, hold the plug on its body.
• Install the device in a way that the power plug can be pulled immediately in case of malfunctions.
Small parts / packaging (plastic parts, cardboard boxes, etc.)
Keep small objects (e.g. screws and other installation parts, memory cards) and packaging material
out of the reach of children, lest they be swallowed. Do not let children play with plastic bags. Risk of
suffocation!
Locating
• Locate the device on the a dry, level, water and heat-resistant surface.
• Choose an installation location, where children cannot reach the device.
• The wall outlet must be easily accessible, in order to be able to unplug the device in a case of an
emergency.
• Do not install this device in a book shelf, built-in cupboard or any other narrow space. Ensure the
ventilation of this device.
• Do not place this device on an amplifier or any other device that can become hot. The heat could
damage the device.
• Do not expose this device to direct sunlight, high temperatures, high humidity or excessive vibra-
tions.
Transport of the device
Please retain the original packaging. In order to ensure sufficient protection when transporting the
device, pack the device in the original packaging.
Cleaning of the outer surface
• Do not use volatile fluids such as insect sprays. By pressing to hard when wiping, the surface can
be damaged. Rubber or plastic parts should not be in contact with the device over a longer period.
Use a dry cloth.
8