Beper 90.391 Betriebsanleitung Seite 10

Drip Coffee maker Use instructions
INSTRUCTIONS FOR USE
Place the coffee maker on a plane and stable surface away from heat or cold sources.
The base of the cup and the water tank get hot when the appliance is working, do not touch these
parts to prevent from burns.
Do not pour liquids into the water tank after turning on the coffee maker.
Do not lift the water tank lid when the coffee maker is working ; wait for some minutes after turning
off the appliance to open the lid.
Do not let the cord supply plugged on the socket if the appliance is not used.
Do not pull on the cod supply to unplug the appliance from the socket.
If the cord is damaged, make it replaced by the authorized assistance centre.
Do not immerse the coffee maker into water or other liquids.
Do not expose the coffee maker to damp or use it outdoors. In case of liquids infiltration into the cof-
fee maker, unplug immediately the appliance from the socket and make it repaired by a professional.
Do not touch the coffee maker or cord supply with wet hands.
The coffee make is for household use only and not for commercial purpose.
DESCRIPTION Fig.1
1 – Lid
2 – Water pipe
3 – Water tank
4 – Level water indicator (cup number)
5 – Switch on/off I/0
6 – Base
7 – Keepwarm plate to keep the coffee warm
8 – Glass pot with handle
9 – Glass pot lid
10 – Anti-drop feature
11 – Filter holder
12 – Permanent filter
13 – Filter
14 – Cord supply
15 – Measuring spoon
INSTRUCTION FOR USE
FIRST USE
Before turning on the coffee maker for the first time, start procedure twice or three times only with
cold water and without coffee. When complete, turn off the coffee maker using the switch on/off (5)
and let the coffee maker cool for 5 minutes.
Then turn on the coffee maker and start again with the procedure.
10