Sony VPL-SW630C Kurzreferenz Seite 50

USB connector (Type A) (
For connecting a USB wireless LAN module IFU-WLM3 (not supplied) ("Presentation
Function via Network").
Wireless router, access
point
Tablet PC/Smartphone
Computer
Notes
• Undesignated USB wireless LAN modules do not work.
• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in
Standby mode (Standby Mode: "Low"), or the AC power cord is unplugged from the wall outlet.
• When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN
module IFU-WLM3 (not supplied), set "WLAN Network" to "Access Pt. (Manual)" in the
projector's "WLAN Settings".
• For connecting to the access point, access to the Web browser, and input the settings for the access
point to connect. For details, see "Setting the WLAN Network of the projector".
• The factory default settings for "Access Pt. (Manual)" are as follows.
SSID: VPL + MAC address for LAN
Security Method: WEP(64bit)
Password: sony1
14
GB
Connecting the Projector
)
USB wireless LAN module
IFU-WLM3 (not supplied)