Makita GA5020 Bedienungsanleitung Seite 5

Model GA5021C
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
Model GA6021C
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
Model GA5020
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
Model GA5020C
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
Model GA6020
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
Model GA5021
Work mode : surface grinding
Vibration emission (a
h,AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K) : 1.5 m/s
2
) : 8.5 m/s
2
2
) : 2.5 m/s or less
2
2
) : 8.5 m/s
2
2
) : 2.5 m/s
2
2
) : 9.0 m/s
2
2
) : 2.5 m/s or less
2
2
) : 9.5 m/s
2
2
) : 2.5 m/s or less
2
2
) : 10.0 m/s
2
2
) : 2.5 m/s or less
2
2
) : 13.5 m/s
2
2
) : 2.5 m/s or less
2
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type:
GA5020,GA5020C,GA5021,GA5021C,GA6020,GA6021,
GA6021C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
5
as the
30.1.2009
Tomoyasu Kato
Director
ENG902-1
ENH101-16
responsible