Description Of The Parameters - Oeg Kms Bedienungsanleitung

CHANGING THE SERVICE SETTINGS
To enter the desired service group, you should select the appropriate parameter group or
subgroup in the menu, then press and hold the navigation button for 4 seconds. The dis-
play shows up the first service parameter of the chosen group. Move between the pa-
rameters with turning the button.
To change the parameter value press the button, the value of the parameter begins to
flash, then change it by turning the button. To confirm the chosen value press the button
once again.

DESCRIPTION OF THE PARAMETERS

Contents of each parameter is displayed like this:
Parameter mark
Factory
default
S e r v i c e s e t t i n g s m a n u a l
4 s
- Service settings are locked
Parameter value
MIN possible vault
MAX possible vault
Parameter description
36