Appendices; Maintenance - EPAK Basic Line TV 44 Handbuch

7

APPENDICES

7.1

Maintenance

The satellite tracking system EPAK-TV is easy to maintain. The following instructions are
sufficient to sustain an optimal capacity of the antenna unit:
• Clean the radome once a month using fresh water and a mild detergent to remove dirt
and salt deposits.
• Do not detach the radome!
• Do not spray directly on the radome with high pressure water from a hose!
• Check cable connections to be tight and free of corrosion. Clean the cables regularly.
!! The radome has a protective layer of UV-stabilized and maritime climate-proof lacquer.
Do not apply any additional paint, wax, preservative, solvent, chemicals, or adhesive
labels. Do not use alcohol or dilution or similar products to clean the radome. Any kind
of coating will void warranty claims! In case any solvent comes in contact with the
radome by accident, rinse the area immediately with water and, if necessary, with a mild
detergent!
!! A guarantee for UV and colour stability as well as fracture strength can only be given
within the warranty of the supplier / dealer.
Footnotes of chapter 7.2
1) Always possible, as long as free satellite storage positions are available.
2) Only shown in the display if the respective satellite storage position is occupied.
3) Only the occupied satellite storage positions are shown.
4) Confirm function by pressing , cancel by pressing .
5) Function has to be carried out in the harbour in calm waters.
6) Standby mode can be reached from all menu items by shortly pressing the  key.
7) Display flashes (New Sat / Search?) .
8) Only, if at least one satellite is stored and the receiver supports this feature (DiSEqC™).
9) Special functions in standby mode.
English Page 21 / 34