Troubleshooting; Possible Cause - Klarstein 10032308 Bedienungsanleitung

EN
34

TROUBLESHOOTING

Problem
Burners will not light using
the ignition system.
Burner will not light
with a match.
Low flame or flashback
(fire in burner tube-a
hissing or roaring
noise may be heard)
Declaration of Conformity
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
Germany
This product is conform to the following European Directives and
Regulations:
Regulation (EU) 2016/426

Possible Cause

LP gas cylinder is empty
Faulty regulator
Obstructions in burner
Obstructions in gas
jets or gas hose
Electrode wire loose
or disconnected on
electrode or ignition unit
Electrode or wire
is damaged faulty
push button igniter
LP gas cylinder is empty.
Faulty regulator.
Obstructions in burner.
Obstructions in gas
jets or gas hose.
LP gas cylinder too small
Obstructions in burner.
Obstructions in gas
jets or gas hose.
Windy conditions.
Solution
Replace with full cylinder
Have regulator
checked or replace.
Clean burner.
Clean jets and gas hose.
Reconnect wire.
Change electrode and
wire change igniter.
Replace with full cylinder.
Have regulator
checked or replace .
Clean burner.
Clean jets and gas hose.
Use larger cylinder.
Clean burner.
Clean jets and gas hose.
Use grill in a more
sheltered position.