Product Description; Before First Use - Klarstein 10028537 Bedienungsanleitung

1 Hinge
2 Internal light
3 Fan mask
4 Shelf
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
• This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level
your appliance, adjust the front legs at the bottom of the appliance.
• Foe recedes installation away from direct sunlight and sources of heat (stove, heater, radiator, etc.).Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold
or hot ambient temperatures may also cause the appliances not to perform properly.
• The appliance is for indoor use only.
7

Product Description

5 Foot
6 Water tray
7 Door seal
8 Lower hinge

Before first Use

9 LED Display
10 Temperature DOWN
11 Temperature UP
12 Light