Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.3
Fitting the belt clip
After you have installed the batteries, you can fit the belt clip supplied
with the unit. Slide the belt clip into the guide from below until it
audibly engages. To remove the belt clip again, pull the fixing strap up
slightly and pull the belt clip downwards.
2.4
Connecting the charging station
Insert the plug of the power supply into the socket on the charging
station and plug the power supply into a properly installed 230 V
mains socket. For safety reasons, use only the plug-in mains power
supply provided.
2.5
Charging the radios
The rechargeable batteries for the two radios have a stand-by time of
max. 30 hours at room temperature and a maximum period of use of
up to 20 hours. The current battery capacity is shown in the display.
To charge, place the radios in the charging station for ca. 14 hours.
Full
2.6
Connecting the headset
The radios can be used with an external microphone and earpiece, a
so-called headset. In this way, you can keep your hands free for other
activities. You will find the two connections on the top underneath a
cover. The headset is obtainable as an accessory.
Open the cover on the top of the radio and plug the double plug into
the sockets. The loudspeaker and microphone in the radio are
switched off when the headset is in use. You will find the speech
button on the miniature microphone. Make sure that the microphone
opening remains unobstructed. When using the headset, we
recommend that the keypad lock on the radio is activated so that no
settings can be changed unintentionally.
18
- Commissioning -
almost flat No indication
Batteries are discharged
(not supplied)
Werbung
Kapitel
Inhaltsverzeichnis
