Use Fitvigo App - ADE BA 1602 FITvigo Bedienungsanleitung

‚ Only the measured body weight is shown on the display. All other
data can be viewed exclusively in the FITvigo app. You must therefore
have connected the scales with the app already.
‚ So that the calculated data is as precise as possible, you must have
your personal data (birth year, sex, weight, and height) recorded in the
app – in this regard, see also "Use FITvigo App".
1. With a little force, step once briefly onto the weighing surface.
"0.0" and the set unit of measurement, e.g. "kg", will be shown on the display.
When the scales are switched off you can also step onto the scales directly.
2. Position yourself barefoot on the scales. Remain standing still and do not hold on to
anything.
− Ensure that each foot is standing completely flat on the weighing surface.
− There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
The measured weight will be displayed shortly thereafter.
The bioelectric impedance analysis is then carried out and the data is then
transmitted to the app.
A few seconds after you step off the weighing surface, the scales will switch off
automatically.

Use FITvigo app

The data ascertained by the scales are transmitted to the FITvigo app, as long as you
have connected it to the scales (see "Connect Device with the App").
In this regard, pay attention to the following symbols:
Meaning
Symbol
BIA
Bioelectric impedance analysis is being carried out
Existing Bluetooth connection
Data is being transmitted
‚ Data transmission successful: the symbol disappears.
‚ Data transmission unsuccessful: the symbol continues to be
displayed. The pending measurement data is temporarily stored in
the scales and, after conclusion of the next measurement, transferred
to your smartphone.
Body Analyser Scales BA 1602
Use FITvigo app
23