BaByliss Curl Secret C1600E Benutzerhandbuch Seite 11

- The selected temperature flashes on the LCD screen until the
temperature is reached.
- Press the button of the timer (4) depending on the desired
curl effect. For loose curls, select the minimum time
setting. For tighter curls, select the maximum time setting.
Please refer to the table below:
Time
8 8 seconds
10 10 seconds
12 12 seconds
• Select the adjustment of the direction of the curl by pressing the button
(5), according to the desired result:
- For an even, more sophisticated style, adjust the appliance to the
"Left" position, to create curls to the left side of the head. Then
adjust the appliance to the "Right" position, to create curls on the
right side of the head.
- For a softer, more natural style, adjust the appliance to the
"Alternate" position. This adjustment will create alternating curls,
first in one direction and then in the opposite direction.
NB : To switch from the automatic mode to the manual mode, press the
button of the temperature selection (3) or the button of the timer (4) or
the button of the direction of the curl (5)and select the desired setting.
To switch from the manual mode to the automatic mode, briefly press
the I/0 button (2) and select the desired setting.
Precautions for use
• Ensure that hair is dry.
• Clip the upper layers to the top of your head and start working on the
layers underneath.
• Separate a section of hair no wider than 3 cm. Ensure the section is
thoroughly combed through.
• Bring the appliance close to the hair and position it in the right
direction: the cavity formed by the cylinder downwards (FIG.1 and 2)
and facing the head. (FIG. 3 and 4).
Audio beep indicator
3 beeps w/ 1 sec interval
+ 4 consecutive beeps
4 beeps w/ 1 sec interval
+ 4 consecutive beeps
5 beeps w/ 1 sec interval
+ 4 consecutive beeps
11
Curl effect
Loose waves
Soft curls
Defined curls