Installation Steps; Package Contents; Recommended Tools - Axis Q6042-E Installationshandbuch

AXIS Q60 Series
Installation Guide
This Installation Guide provides instructions for installing AXIS Q6042-E/Q6044-E/Q6045-E PTZ
Dome Network Camera on your network. For other aspects of using the product, see the User
Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 13.
4. Install the hardware. See page 14.
5. Access the product. See page 18.

Package Contents

• AXIS Q6042-E/Q6044-E/Q6045-E PTZ Dome Network Camera
• Clear dome cover (premounted)
• Sunshield, including screws T20 (3x)
• RJ45 Push-pull Connector (IP66)
• AXIS T8124 High PoE Midspan 1-port (LPS)
• Installation and Management Software CD
• Printed materials
-
-
-

Recommended Tools

• Torx screwdriver T20
• Torx screwdriver T30
• Phillips screwdriver PH2 – if replacing the dome cover
• Cable shoe pliers
• Diagonal pliers
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
9