Remote Controller - DJI MATRICE 600 PRO Kurzanleitung
Vorschau ausblenden
Andere Handbücher für MATRICE 600 PRO:
- Bedienungsanleitung (71 Seiten) ,
- Bedienungsanleitung (6 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote Controller
The maximum transmission distance of the Matrice 600 Pro remote controller is 16,400 feet (5 km)*. The built-in LiPo
battery powers the device for up to four hours* in between charges. An ergonomic design puts gimbal (optional)
control functions within comfortable reach, crucial when operating the aircraft. Important controls such as raising and
lowering the landing gear and activating the Return-to-Home procedure can also be triggered with a tap of a button.
The LIGHTBRIDGE
2 HD video downlink is integrated into the remote controller, allowing real-time camera
TM
footage to be displayed in the DJI GO
camera to be operated on two separate controls, which have a communication range of up to 50 meters.
Folded
11. Gimbal Dial
12. Camera Settings Dial
13. Record Button
14. Flight Mode Switch
15. Shutter Button
16. Playback Button
17. Micro USB Port
18. SDI Port
19. HDMI
Port
TM
20. USB Port
21. C1 Button
22. C2 Button
The stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft's elevation and
heading.
The right stick controls the aircraft's forward, backward and lateral movements. The gimbal dial controls camera tilt
or pan.
Left Stick
For more information about how to connect and use the remote controller, please refer to the user manual of the Matrice 600 Pro.
You can change the stick mode in the DJI GO app.
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at
an altitude of about 400 feet (120 meters). The maximum run-time is tested under laboratory environment, only for your reference.
TM
app. Dual remote controller mode makes it possible for the aircraft and
8
1
2
5
3
6
7
Right Stick
1. Power Button
2. Landing Gear Control Switch
3. Return-to-Home (RTH) Button
4. Control Sticks
5. Status LED
9
6. Battery Level LEDs
7. Power Port
8. Mobile Device Holder
9. Antennas
10. Handle Bar
4
10
17 18 19
21
11
13
14
20
22
12
15
16
Gimbal Dial
3
Werbung
