avidsen IPC281-Ex Bedienungsanleitung Seite 32

g - rESETTiNg
If there is a problem or the login details have been
lost, the camera can be reset to its default settings
by pressing the Reset button on the camera for 10
seconds.
Settings
Username
Password
Time Zone
Ports
Plug and play access
Motion detection
Main video stream
Secondary video stream
Night vision
H - FAQ
If your problem is not covered below, please contact our helpline.
Symptoms
Cannot connect to camera over
local area network (e.g. IPCam
Search)
The camera feed cannot be
accessed over the internet
14
en
Default value
admin
admin
GMT+1
http: 80
rstp: 554
rtp: 6600
ONVIF: 8080
ftp: 21
Enabled
Disabled
720p @ 25 frames per
second
640 x 352, 25 images
per second
auto
Possible causes
Network problem
Network configuration problem
Network configuration problem
Incorrect video settings
720P WiFi iP outdoor camera
Solutions
Check your connections.
Temporarily connect using the
network cable if the camera is
connected over WiFi
Check your camera's network
connection settings. Reset
your camera if it is no longer
accessible.
Check your device settings (box,
router)
Check the video settings and
reduce the quality if necessary
Test the "flux secondaire
[secondary stream]" to confirm