Grundig Atlanta SE 7250 PIP/DOLBY Service Anleitung Seite 24

Allgemeiner Teil / General Section
22
1 - 24
SETTINGS
____________________________________________________________________________________
Programming TV channels
The TV set is equipped with the automatic tuning system "ATS euro plus" which
carries out channel position assignment for you.
1 After switching on the TV set, select he »English« dialog language and con-
firm with »OK«.
Note:
If the »Select dialog language« page does not appear, press »
»OK« to display the Dialog Centre menu.
Use », , « or ». .
confirm with »OK«.
Use », , « or ». .
house« row then confirm with »OK«.
2
Confirm your country with »OK«.
The automatic tuning system is started. Depending on the number of
channels which can be received, the search can take one minute and more.
3 When the automatic allocation of the channel positions is completed, a table
with information about the installation menu is displayed.
4 Press »TXT« to exit this table.
The »INSTALLATION« menu is displayed.
SETTINGS
____________________________________________________________________________________
Setting the Dolby level
Note:
If you do not operate the TV set with the standard loudspeaker configuration
(left/right, centre, surround), select the »Speaker configuration« menu prior
to setting the Dolby level and select there the loudspeakers connected.
1 Use the », , « or ».
then confirm with »OK«.
2
Adjust the same volume level for all loudspeakers.
3
End the setting with »TXT.
A table with information about the Easy Dialog System appears.
4 Press »TXT« to switch to TV operation.
Note:
It is possible to call up all functions of the »INSTALLATION« menu also later
in the Easy Dialog Centre under »INSTALLATION«.
« to select the »AUTOMATIC PROGRAMMING« row then
« to select the »Complete Reprogramming when moving
. « button to select the »Dolby level adjustment« row
CUC 1832 / 1930 / 1931
i « and then
21
GRUNDIG Service