Elinchrom Quadra RX / AS Gebrauchsanleitung Seite 9

The Li-Ion Battery Box implements a
full-integrated monitoring circuitry, which
allows the user to know exactly the
available capacity of the battery when
pressing the push button, located on the
right side of the Battery Box LED's. If the
charge level is checked whilst the Battery
recharges, 1 to 4 LED's might light up,
whereby always the last LED flashes
depending on the charge level.
IMpORTANT
• Ranger Quadra does not show the correct charge level on the top display
when a Li-Ion Battery Box is connected. The correct charge level can be
checked directly on the Li-Ion Battery Box, when the push button is shortly
pressed on the right side of the LED's.
• For further information please read the "Li-Ion Compatibility of Ranger
Quadra Packs and Heads" chapter.
BATTERy BOx fUSE
The Battery Box is secured with an ATO 20 A fuse. The topside of the Battery
Box includes transport pockets for two ATO 20 A fuses. When travelling by air
and in general, remove the fuse to deactivate the Battery Box and place the
fuse into the free transport pocket!
75% -100%
50% -75%
25% - 50%
10% - 25%
< 10%
User Manual
EN
flashes
9