Flex L1109FE Bedienungsanleitung Seite 18

– To switch off the power tool, release the
switch rocker (6) by pressing the rear end.
Quick-release guard
(L1710FRA / L1710FRC only)
(ERKIV
When using the angle grinder for roughing
or cutting, never work without the guard.
1. Pull out the mains plug.
2. Loosen the clamping lever.
3. Adjust the guard (2a).
4. Retighten the clamping lever.
2SXI
18
Angle grinder L1109FE, L1710FRA, L1710FRC
Guard 125 mm
(L1109FE only)
(ERKIV
When using the angle grinder for roughing
or cutting, never work without the guard.
1. Pull out the mains plug.
2. Connect the guard to the clamping
flange with the clamping ring by inserting
the cam on the clamping ring into the
groove on the flange.
3. Rotate the guard into the required
position and tighten securely with
a screwdriver.