AEG L 87695 WD Benutzerinformation Seite 24

24 www.aeg.com
Iron dry level
The drying time symbol goes off
The display shows a time value,
calculated on a default load size. If the
amount of your laundry is more or less
than the default size, the appliance
adjusts automatically the time value
during the cycle.
2. Press button Start/Pauze - Départ/
Pause to start the programme. In the
display:
The door locked symbol comes on.
The drying symbol starts to flash.
The symbol of the set level stays on
(e.g. Cupboard dry).
The other level symbols go off.
The display updates regularly the drying
cycle time (every minute).
You cannot set all levels for
all kind of laundry (refer to
"Programmes for automatic
drying" table) .
10.3 Timed drying
1. Press button Droogtijd - Minuterie
repeatedly to set the time value (see
the «Drying Programme» table).
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
Set time value.
Each time you press this button the time
value increases by 5 minutes. The display
shows the set time value.
After some seconds the set time value on
the display changes: the appliance
calculates also the duration of the anti-
crease and the cooling phases.
Final time value.
2. Press Start/Pauze - Départ/Pause to
start the programme. The text bar
tells that the appliance is drying. The
display shows the new time value
every minute.
The drying symbol starts to flash.
The door locked symbol comes on.
If you set the time value of
only 10 minutes, the
appliance performs only a
cooling phase.
10.4 At the end of the drying
programme
1. The appliance stops automatically.
2. The acoustic signals operate (if they
are active).
3. In the display
4. The indicator of button Start/Pauze -
Départ/Pause goes off.
5. The last minutes of the drying cycle
the appliance performs the anti-
crease phase.
The anti-crease symbol
The door is still locked (the symbol
is on).
6. Press button Aan/Uit - Marche/Arrêt
for some seconds to deactivate the
appliance.
comes on.
flashes.