Preparing Beverages; Preheating The Appliance - Klarstein 10033209 Bedienungsanleitung

EN
38

PREPARING BEVERAGES

CAUTION: To avoid burns do not touch or remove metal components of
the appliance with your bare hands when the appliance is in use. The metal
components of the appliance are hot during operation. Make sure to always
grab metal components by their handle, lever or knob only. Leave metal
components to cool off after use for 15 minutes before moving or cleaning.

Preheating the Appliance

To make a cup of good Espresso, we recommend preheating the metal components
of the appliance and the coffee cup. That way the flavour of the Espresso will not be
influenced by cold components.
CAUTION: Make sure that the funnel is inserted into the funnel holder to
prevent scalding from hot liquid pouring out of the outlet.
NOTE: Do not put any coffee into the steel mesh yet.
1 Make sure that there is enough water in the water tank and refill it if necessary.
2 Make sure that the steam knob is at position 0 and the button
accidental scalding.
3 Place a coffee cup on the drip grid.
4 Connect the power cord of the appliance to a power source.
5 Press the button to turn on the appliance. The indicator POWER will now light.
6 Press the button . The appliance will start pumping water through the outlet.
7 When water starts flowing out of the outlet, re-press the button
8 The appliance now begins to heat the water.
9 When the indicator WATER lights heating has finished.
10 Press the button and let the water run until the vessel is filled.
1 1 Re-press the button to stop.
12 Pour the water from the vessel into the sink.
13 Dry the vessel, drip grid and drip pan.
Now the appliance is ready to prepare Espresso!
is off to prevent
to stop.