User Logout; Using The Setup Wizard - Vanderbilt Eventys EX16 NVR Schnellstartanleitung

User Logout

Purpose:
After logging out, the monitor turns to the live view mode and if you want to perform any operations, you need to enter user
name and password log in again.
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click Logout.
After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password
to unlock the system.
3.5

Using the Setup Wizard

The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts once the
device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard. Follow the guide of
the Setup Wizard to configure the system resolution, system date/time, network settings, HDD management, record settings,
etc.
© Vanderbilt 2017
Logout
Figure 3.8
Wizard
Figure 3.9
16