Velleman SHE6N Bedienungsanleitung Seite 8

13. Hazard Alarm
This alarm will sound when your current heart reaches 99% of your MHR.
14. Auto Timer
The timer is activated automatically whenever the pulse signal is received. It keeps
track of the total exercise time as long as you are wearing the belt and switch to
pulse mode.
15. Three Audible Alarm Sounds
Select the PULSE mode with button A. Select alarm ON or OFF with B (the
symbol is displayed when the alarm is ON).
The device emits: -
16. Alarm Activation
Use button C to select the target zone for the alarm: or
Select if you wish the alarm to be activated when your heart rate exceeds the
upper or drops below the lower limit.
Select if you wish the alarm to be activated only when your heart rate exceeds
the upper limit.
17. Target Zone Recall
Hold button C until the target zone is displayed (upper and lower limit).
18. Auto Timer Reset
When no signal is received for 5 minutes while the device is in the pulse mode, the
SHE6N will automatically return to the clock display mode. The recorded exercise
time will be reset.
SHE6N
1 beep per second when the current heart rate descends
below the LOWER limit.
- 2 beeps per second when the current heart rate exceeds the
UPPER limit.
- 4 beeps per second when the current heart rate is at least
99% of your MHR.
8
.
VELLEMAN