Operation - auna 10032833 Anleitung

EN
16

OPERATION

Turning ON/OFF
The PA speaker can be powered when connected to main power
or using the internal 12 V battery.
1. Connect the power cable to the top of the unit.
2. Connect the other end of power cable to main power.
3. Turn on the switch for the main power.
4. The unit will automatically power on when connected to main power.
Notes : If you wish to use the internal battery power of the unit, just
simply turn on the Battery switch located on the top of unit to ON.
Charging
Before using the PA speaker for the first time, charge the unit at
least 8 hours.
1. Connect the power cable to the top of the panel.
2. Turn off the battery switch on the top of the panel.
3. Recharge indicator light will be on when unit is charging.
Notes : The internal battery will charge while the unit is being operated
and the power switch is on. It is better to charge the unit while the power
switch is off.