Bluetooth Playback; Bt Playback - auna 10032833 Anleitung

EN
18
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD
slot on the PA speaker.
1. Turn on the unit.
2. Insert your USB or SD card into the slot.
3. Once inserted the USB or SD card unit will automatically play.
4. You can use the
Notes: The speaker system can play the following audio file formats:
MP3,MP4,WMA.The USB/SD Card no more than 32GB. Operation
may be slower when searching large memory files. It will need several
seconds to respond when your USB/SD Card full of contents.

BLUETOOTH PLAYBACK

You can connect your BT phone or other device to the PA speaker.
1. Turn on the unit.
2. Press the INPUT button which is located on top control panel, next to
the USB/SD slot.
3. The BT is on when you hear two „tone" indicator sound.
4. Use your BT phone or other device to search for the PA speaker. It will
displayed as [DisGo Box].
5. Connect your device by selecting [DisGo Box] , it will require you to
enter a four digit code, the code is 0000.
6. Enter the code and connect with unit.
7. Play music on your phone or device, sound will come from the speaker
through the BT wireless connection.
8. You can use the VOLUME/BASS/TREBLE to adjust the sound level for
BT, also you can adjust the BT music sound through your own phone or
other device.
Notes: If there is no sound through the PA speaker during BT, Check the
volume controller both on the unit and on your phone or other device.
/ / to control and play music.